As from "nothing" to do a spaceport
For handy plastic bottles, parts of broken toys, boxes, covers, and generally anything good master all amiss.Here are just a few ideas, but worth it to get involved, and you will figure out how to look your spaceport and what it must be hardware.Flying saucerYou will need:• an old computer disk;• round plastic jar and a few caps from the usual bottles;• nuts, bolts and metal plates;• superglue and glue;• silver paint;• colored paper;• tools: awl and needle files or electric drill.Mark and make the drive holes for mounting of supports before you assemble the model. You can make them hot Shyla and expand a file or a drill with a drill the correct diameter at low speed. Fasten the stand using bolts and nuts.You can also provide openings for antennas - each dad or grandfather probably find unnecessary springs and wires.Then collect and glued our aircraft.To the details of our space better equipment was attached, be sure to smooth out the surface a little bit to trim the edges and get rid of the bumps and irregularities. All items must be free of grease.After drying again put on the seam a couple of layers and allow to dry - so the joints will be more reliable and will not fall apart on the first day.After drying, paint the plate in any "cosmic" color. Because it is cold and there is no possibility to work in the fresh air, then choose paint better odourless, such as latex or acrylic. Dyeing have several times.The illuminators can be made of plain colored paper and glue PVA, with and covering them with a layer of glue, so that they clung and acquired lacquer effect. To make the portholes with the bezel, you need to cut two circles of different colors and sizes and stick to one another.If your Bank is transparent, you can leave the Windows open circles, and inside paste seats from the old toy car, a steering wheel, control panel. This, of course, not easy, but it will be interesting to look inside the saucer through the transparent Windows.You can also choose not to glue and not to paint over the junction of the cans with the lid, and then your dish will hatch, which can be unscrewed.RocketYou will need:• plastic half-liter bottle with a special cap for athletes;• small bottles of the same size for "fuel tanks".